H&K MP5SD6 Full Metal AEG Rifle with Eshooter ETU GEN-2 in Black (CM041SD6)

H&K MP5SD6 Full Metal AEG Rifle with Eshooter ETU GEN-2 in Black - CM041SD6

Key Features

- Officially licensed H&K MP5SD6 manufactured by Cyma under Umarex licence 

- Factory-installed Eshooter ETU Gen-2 electronic trigger system 

- Metal upper receiver and cocking tube with polymer lower grip frame 

- Classic MP5SD ribbed rubber handguard and large mock suppressor 

- Multi-position retractable sliding stock for compact CQB handling 

- Reinforced Version 2 gearbox with high-speed steel gears and steel bushings 

- High-torque neodymium motor for responsive gearbox cycling 

That unmistakable suppressed MP5SD6 profile, now backed up by a programmable ETU and modern gearbox setup.

Description.

The H&K MP5SD6 Full Metal AEG Rifle with Eshooter ETU GEN-2 in Black, model CM041SD6, recreates one of the most recognisable MP5 configurations while giving the internals a thoroughly modern update. Made by Cyma under official Umarex and Heckler & Koch licence, this Rifle pairs the famous SD-style front end with a metal receiver, sliding stock and programmable electronic trigger. For an airsofter who wants the classic suppressed MP5 appearance without settling for an old-generation Airsoft AEG internally, it's a particularly interesting combination.

The defining feature is obviously that SD front end. Rather than the conventional exposed barrel and flash hider found on a standard electric rifle, the CM041SD6 uses the distinctive ribbed rubber handguard and large threaded mock suppressor associated with the MP5SD. It gives the airsoft gun a completely different silhouette from a regular MP5 and, frankly, is half the reason people fall for the SD in the first place. Few submachine gun designs are quite as easy to recognise from across a skirmish site.

The mock suppressor forms an integral part of the SD appearance and can be unthreaded when access is required for maintenance or cleaning. There's also internal clearance intended to accommodate accurate inner barrel configurations. It's worth remembering that this is a mock suppressor on an Airsoft AEG; the main benefit is the authentic SD styling and the protected front-end arrangement rather than the function of a real firearm suppressor.

Behind it, the upper receiver and cocking tube assembly are metal, while the lower grip frame is made from impact-resistant polymer. This gives the CM041SD6 the solid weight and balance associated with a full-metal MP5 replica while retaining the correct mix of materials around the grip area. Official H&K licensing and authentic markings finish things properly. It feels much more convincing than a generic BB Gun that merely borrows the MP5 shape.

The SD6 configuration uses a multi-position retractable sliding stock rather than the solid fixed stock of an MP5SD5. Press the release and the stock can be collapsed towards the receiver, shortening the overall footprint when you're working through narrow corridors, barricades and doorways. Extend it again and you regain a stable shoulder position. For mixed CQB and general skirmish use, that versatility is useful; you aren't permanently committed to either an ultra-short or full-stock configuration.

Inside, things get considerably more contemporary. The factory-fitted Eshooter ETU Gen-2 replaces the traditional mechanical trigger switch arrangement with electronic control. The system provides complete cycle detection and a much sharper trigger response, something you'll notice most when firing repeated semi-auto shots. On indoor sites where full-auto isn't permitted, a responsive trigger is worth far more than a specification sheet boasting an enormous automatic rate of fire.

The Eshooter ETU Gen-2 also provides programmable firing modes, including 3-round burst configurations. Electronic pre-cocking can prepare the gearbox for the next cycle, reducing the delay between touching the trigger and firing the shot. Active braking helps bring the motor to a controlled stop and reduces over-spin, while smart low-voltage cutoff helps protect LiPo batteries against excessive discharge during a long day's play.

Backing up the electronics is Cyma's reinforced Version 2 gearbox shell with high-speed steel gears, steel bushings and a high-torque neodymium motor. It's a sensible specification for this kind of airsoft rifle: sturdy mechanical components underneath, with the ETU handling the more sophisticated trigger and cycle-control duties. The result is an MP5SD6 that keeps its wonderfully old-school exterior without feeling equally old-fashioned when you pull the trigger.

Magazine compatibility is refreshingly uncomplicated. The CM041SD6 accepts standard Tokyo Marui-spec MP5 AEG magazines, including mid-cap, high-cap and straight-stick designs. Existing MP5 players can therefore make use of compatible magazines they already own, while new owners have a broad range of magazine styles available for putting together their loadout.

The MP5SD6 has always occupied an interesting spot in the MP5 family. It's longer up front than a compact Kurz or PDW model, yet the sliding stock means it can still be shortened when the environment gets cramped. That makes the CM041SD6 a good fit for someone who wants the classic special-operations appearance but still intends to use the gun hard rather than leave it hanging on a wall.

Ultimately, this model is about combining two very different generations of airsoft. Outside, you get the famous MP5SD shape: ribbed handguard, substantial mock suppressor, metal receiver and retractable stock. Inside sits the Eshooter ETU Gen-2 with programmable modes, pre-cocking and active braking. Retro looks, modern trigger behaviour. Rather a nice way to do an MP5.

Other Great Features are,

Official Umarex and Heckler & Koch licensing 

Authentic H&K trademarks 

Classic MP5SD6 integrally suppressed-style profile 

Eshooter ETU Gen-2 with complete cycle detection 

Programmable firing modes including 3-round burst configurations 

Electronic pre-cocking for faster trigger response 

Active braking to control motor over-spin 

Low-voltage protection for LiPo batteries 

Multi-position retractable sliding stock 

Threaded removable mock suppressor assembly 

Tokyo Marui-spec MP5 AEG magazine compatibility 

In the box:

- H&K MP5SD6 Full Metal AEG Rifle with Eshooter ETU GEN-2 in Black - CM041SD6 

Specifications

Manufacturer: Cyma 

Licence: Official Umarex / Heckler & Koch licence 

Model: CM041SD6 

Platform: H&K MP5SD6 

Platform type: Airsoft submachine gun / rifle 

Power system: Electric AEG 

Gearbox: Reinforced Version 2 

Electronic trigger: Eshooter ETU Gen-2 

Gears: High-speed steel gears 

Bushings: Steel 

Motor: High-torque neodymium motor 

Upper receiver: Metal alloy 

Cocking tube assembly: Metal 

Lower grip frame: Impact-resistant polymer 

Handguard: Ribbed rubber MP5SD-style handguard 

Front assembly: Large threaded removable mock suppressor 

Stock: Multi-position retractable sliding stock 

Magazine compatibility: Tokyo Marui-spec MP5 AEG mid-cap, high-cap and straight-stick magazines 

Colour: Black 

If you've spotted the H&K MP5SD6 CM041SD6 at a lower advertised price on another website, send us the competing listing through our price match service and we'll see if we can beat their price.

Sku :

214075