Specna Arms SA-E06-H EDGE™ Heavy Ops Stock URX3 in Tan

Specna Arms SA-E06-H EDGE™ Heavy Ops Stock URX3 in Tan

Key Features
- ORION gearbox
- Nano Coating finish
- Licensed Rock River Arms markings
- ESA™ Quick Spring Exchange System.

This gun is great for skirmishing

Description

This m4 model by Specna Arms is a well-machined and hard-wearing rifle that'll surely give you the edge on the field. It has a modern look and state-of-the-art internals, offering the best possible performance.

The rifle starts with a standard M4 flash hider in black working with a 14mm CCW connection allowing a vast amount of customizability with the addition of a suppressor or tracer unit. The hand guard of the rifle is full metal in tan and is designated as the URX3. It gives plenty of space for attachments with three short 20mm RIS rails and a large full-length rail which lead to the upper receiver. The handguard has several circular venting holes for aesthetics. The outer barrel is metal and gives a good level of protection to the inner barrel, ensuring that it maintains its zero and has a clear amount of room at the front preventing any dirt or mud from becoming packed into the rifle. The inner barrel is a 6.03-tight bore, which will greatly increase the accuracy and reliability of shots. However, this can cause issues if any dirt gets into the barrel, so we recommend getting a gun cleaning kit to ensure the rifle runs at optimum performance.

This BB gun has the ESA™ Quick Spring Exchange System, and thanks to this system, it lets you quickly adapt the power of the rifle to the requirements of the airsoft playing field without having a set of special tools; all that is needed is to remove the stock slide to gain entrance to the spring, without having to pull out and disassemble the gearbox.

The rifle's stock is a Heavy ops stock with a large stock foot with a textured rubber cheek rest and butt pad. The stock sits on a metal six-position buffer tube, allowing the user to adjust the size of the rifle to ensure they're comfortable and in the optimum position to use the gun. The battery fits into the buffer tube and can be accessed by pushing the clips on the but pad together and pushing them out. This will remove the butt pad and show the battery compartment.

The electronics of the rifle are incredibly well made and are well insulated with several safety features and troubleshooting measures. The X-ASR is a special feature that the gun has, which gives an LED identification ensuring that the gun runs appropriately and no damage can affect the internals of the rifle. This system will protect the circuits of your rifle from electrical damage and issues that may come up on AEGs. The gearbox is a top-of-the-range Orion gearbox that maintains good power and consistent shots.

The rifle's grip is a high-quality polymer in tan with an excellent texture and solid feel. The replica feels nice and is very unlikely to slip or fall out of the hand, even if gloves are worn. The upper receiver is full metal and has a very nice nano-coating finish. It is well-machined and has interesting features to aid in using the rifle. The charging handle can be pulled to the rear to open the dust cover, which will reveal the hop-up adjuster. The gun uses a rotary-adjusted hop unit that gives the most precise shots and improves the rifle's range.
The lower receiver is also metal finished in black nano-coating and holds all of the controls of the rifle, such as the fire selector switch and the magazine release. The fire selector switch can be placed on the opposite side for anyone who prefers, showing how inclusive and well-rounded this gun is. The lower receiver is marked with details of the rifle, including manufacturer and calibre. At the rear of the gun, there is a sling point which can be used in conjunction with the one found at the front of the gun or as a standalone attachment point.

The sights of the rifle are spring-loaded flip-up sights to allow a good level of close-quarters accuracy. The sights can be adjusted for windage and elevation to ensure that the best possible shot is taken. There is, however, plenty of top rail to add a scope or sight to improve the aim window of the gun.

The rifle comes with a quick change spring to allow an easier and faster power change to ensure you comply with the UK airsoft site laws. This feature adjusts the power output of the rifle and can be done by anyone.

In the box, apart from the gun, you get two Mid-Cap S-MAG magazines with a capacity of 125 BB rounds each and a foregrip.

S-MAG is an exclusive polymer magazine designed by Specna Arms and comprising of Specna Arms logos. S-mag aids a seamless feeding of BB pellets even at high rate of fire.

Please note The gun does not include a battery or a charger.

The heart of the replica is the ORION gearbox based on a reinforced chassis and equipped with the main spring release function. The replica straight out of the box has a number of very high-quality parts, thanks to which it maintains a very good work culture and is prepared for further tuning. ORION Gearbox is made to work with M140 springs. Inside the replica there are such elements as:

Other Great Features are
- reinforced polymer piston with a full, steel jaw
- 8 mm ball bearings
- aluminium, double air-sealed cylinder head
- aluminium, air-sealed nozzle
- bearing-mounted spring slide
- set of steel gears
- aluminium, double air-sealed cylinder head
- aluminium, double air-sealed piston head with bearings

In the box:
- the rifle.
- 2 x S-MAG Mid-Cap magazine
- additional M90 main-spring
- foregrip
- User’s manual
- certificate
- GATE X-ASR diagnostics card

Specifications
Name: SA-E06 EDGE™ (TAN)
Manufacturer: Specna Arms
Velocity: 310 to 380 fps
Gearbox Version: v2 gearbox
Type of fire: Single or Full auto
The diameter of bearings in GB: 8mm
Length: 750 or 835mm extended
Inner barrel length: 390mm
Weight: 2.7kg
Magazine type: Mid-Cap magazine (125 rounds)
Hop-Up: New Type, adjustable
Blow Back Function: No
Made of: Zinc Aluminium, steel, ABS
Battery included: No
Powered by: Battery
Barrel thread type: 14mm CCW
Quick Spring Change System: YES

Inside the replica there are such elements as:
- reinforced polymer piston.
- aluminum, sealed nozzle
- aluminum, double sealed cylinder head
- aluminum, double sealed piston head with bearings
- a spring guide with bearings
- a set of steel gears
- 8mm ball bearings

Sku :

SPE-01-033906