Nuprol Raven EU17 Semi Auto GBB Pistol in Blue with BDS Sight

Nuprol Raven EU17 Semi Auto GBB Pistol in Blue with BDS Sight

Key Features

- Front lower pistol rail
- Red Dot Sight inc
- Semi Automatic or Full Automatic fire modes
- Trigger lock
- Square sights
- Spare Gas Nozzle Included
- Spare O-Ring Set Included

Reliable gas blowback pistol, with lightweight polymer frame & comes with semi and fully automatic functions


Description

The EU17 is a well-known and recognisable airsoft replica, and NUPROL is proud to offer it to us as a part of their RAVEN series.

This pistol is reliable in either a CBQ or practical pistol shooting due to its realistic gas blowback recoil, front rail, and textured ergonomic grip.

This RAVEN is both durable and lightweight thanks to its construction out of high-density polyer and a lifelike alloy slide that is made of a tough alloy.

Beginning with the front of the pistol, we have the alloy barrel that has a 12mm clockwise female thread at the very end. This thread makes it possible to attach tracer units, suppressors, and other muzzle devices to the barrel by using an adapter that goes from 11mm to 14mm clockwise.

We can see the mock ejection port on the right side of the slide. This is the opening through which we can see the outer barrel, which provides a striking contrast of bright blue on dark black.

Although it does not perform any practical function on an airsoft gas blowback gun (GBB), the rear of the ejection port features a mock extractor that is moulded as a separate piece to add an extra layer of realism. Additionally, it adds a little bit of aesthetic style seeing it moulded as a separate piece to more faithfully simulate the real world original.

On the dust cover of the EU17 is a 20mm Picatinny pistol rail, which enables the mounting of pistol torches, lasers, and any other accessories that are compatible with the 20mm Picatinny standard.

On the rail itself, we can see the plate with the serial number. This plate also serves as a trigger lock safety, which is primarily for transportation purposes. It can be engaged by pushing it backwards, and it can be released by pushing it forwards.

The trigger guard is located at the rear of the frame rail, and in typical fashion for the EU series, it is shaped to facilitate the use of a shooting style known as the "European grip." Additionally, the front face of the trigger guard has checkering for increased grip. Between the trigger guard and the trigger.

The operation of the toy pistol is very similar to that of the real thing; the trigger cannot be pressed unless the separate centre section has also been pressed. This serves to reduce the chances of an accidental discharge, which means that the pistol will not fire unless your finger is on the trigger. This is a safety feature.

Additionally, the frame of the EU17 has a texture that makes it easier to find under fire, and an extended release that makes it simpler to remove the magazine from the weapon. Both of these features are included. The Gen.4 EU series has a magazine well that has a slight flare to it, which makes it easier to load the magazine into the weapon.

If you wear gloves or not, the textured surfaces that are featured all around the pistol construction are an additional ergonomic feature. These textured surfaces make the pistol feel like it is practically glued to your hand when you hold it.

Your pistol's range and accuracy will be significantly improved thanks to the adjustable Hop Up Unit that comes included with this model.

This causes the BBs to spin and displace the air around them as they travel, which results in a more stable and accurate flight pattern. The hop-up works by touching the fired BBs with a small rubber contact patch, which causes the BBs to spin and displace the air around them.

The hop can be adjusted in every way possible to accommodate a wide variety of BB weights and types. To gain access to the Hop-up unit, simply pull the slide back, then place your thumb on the black back plate of the slide, and push it forward until it detaches from the body. This will allow you to access the unit.

if you are looking for a pistol that is dependable, has a low gas consumption, and has a sleek and ergonomic design.

There is no need to look any further than the EU17.

Since it already has a flashy bright blue paint job with two different tones, there is no need to get it UKARA-approved or wait for it to be painted, so you can start skirmishing right away.

This sidearm is ideal for any Airsoft player because it enables you to defend yourself quickly and efficiently against any danger, even if you lose access to your primary weapon.

This model comes with the BDS red dot sight to improve the accuracy of your pistol.

Please be aware that the battery for the BDS Sight is not included. The type of battery you need is a "Button" CR2032 3V Battery. 

Other Features:

Gas Blow Back Pistol
Generation 4 Style Pistol
Semi or Full Automatic firing modes
Two stage safety trigger
Trigger lock
Front lower pistol rail
Square sights
Adjustable Back Straps
Large Magazine Release
Textured Grip for extra hold with Gloves
Removable Back Straps to adjust Grip Width
Spare Gas Nozzle Included
Spare O-Ring Set Included
Compatible with both Green Gas and Co2 Magazines

Technical Details
Brand Raven
Colour: Two Tone Blue & Black
EAN 5060644101834
Length(mm) 210
Weight (g) 1200
Fire Modes Semi / Full Auto
Barrel Length (mm) 90
Barrel Bore (mm) 6.03
Rails 20 mm Under Barrel
Approx. FPS 300
Main Materials HIPS Material & Aluminium

Included
(x1) RAVEN EU17 Replica
(x1) RAVEN EU Series 23R STD GAS Magazine
(x1) Manual
(x1) Parts Diagram
(x1) Spare GAS Nozzle
(x1) Spare O-Ring Set
(x2) Grip Back Straps
(X1) RAVEN PVC Patch

Compatible Magazines
RGM-01-01 - EU Series 23R STD GAS Magazine
RGM-01-02 - EU Series 23R STD CO2 Magazine
RGM-01-03 - EU Series 48R EXT GAS Magazine
RGM-01-04 - EU Series 48R EXT CO2 Magazine

Sku :

RGP-00-03-BDS