Raven EU18 GBB Pistol in Green Camo with BDS Sight

Raven EU18 GBB Pistol in Green Camo with BDS Sight

KEY FEATURES:
- 300Fps (Approx)
- Abs Plastic/Nylon
- Iron Sights
- Good Range
- Powerful
- BDS Sight inc


Powerful GBB Pistol ready for action.


DESCRIPTION:

Nuprols RAVEN Brand is well-known for manufacturing some of the most reasonably priced full-metal GBB pistols available on the market; these pistols also offer outstanding functionality and stunning aesthetic quality to accompany it. 

The EU18 is very similar to the EU17 in that it has an EU Gen.4 finger rigid frame with an ergonomic and effective dot texture. However, unlike the EU17, the EU18 also features a fire selector switch on the left side of the slide, which enables it to operate in fully automatic fire mode.

The pistol has an alloy barrel that has a 12mm CW female thread at the end of the barrel. This thread makes it possible to attach tracer units, suppressors, and other muzzle devices by using a 12mm to 14mm CCW thread adapter. The barrel is located at the front of the pistol.

The front and rear sights of the firearm can be found at the very top of the slide. These sights are of the standard EU style and consist of a white dot and a white "U." These sights are for simple combat pistols, but their design is notable because it uses a dot and "U" configuration. This prevents the shooter from confusing their sight dots when they are under pressure, which enables them to make quick, accurate shots in situations where they need to draw their weapon quickly.

When we move to the back of the slide, we can see that there are deep linear serrations on either side. These serrations provide a lot of grip when we are racking the pistol.

On the right-hand side of the slide, we can make out the fake ejection port, which provides a view of the outer barrel.

There is a mock extractor as a separate piece that is attached to the back of the ejection port on an airsoft GBB for added realism. Although it does not perform any real function on an airsoft GBB, it does add a little bit of aesthetic style, accurately simulating the real pistol.

The ability to unload in full-auto is one of the most notable features of the EU18. This functionality is adjusted using the fixed fire select switch on the left-hand side of the firearm. Semi-auto and full-auto are represented, respectively, by one and three engraved dots.

A full auto burst from a pistol will most likely come as a surprise to enemies and will cause them to stop dead in their tracks.

Although it is not as accurate as single-shot precision shooting, nothing beats having the ability to unload fury by unloading your entire magazine in a matter of seconds. This ability is what sets rapid fire apart from single-shot precision shooting.

When we take a peek at the frame of the EU18, we notice that the dust cover features a 20mm Picatinny pistol rail. This rail makes it possible to mount pistol lights, lasers, and other accessories that are compatible with 20mm Picatinny.

The serial number plate, which is also finished in black, can be seen directly on the rail that it is attached too.

This plate can be used to engage the trigger lock safety, which is primarily for transportation purposes, by pushing it backwards, and it can be released by pushing it forwards.

The trigger guard is located behind the frame rail, and in keeping with the traditional design of the EU series, it is contoured to facilitate the use of a shooting style known as the "European grip," and it features checkering on the front face for increased grip.

The trigger on the EU18s, has a design with two stages. It works exactly the same way as a real pistol, so you won't be able to pull the trigger unless you also press the separate centre section. This serves to reduce the chances of an accidental discharge, which means that the pistol will not fire unless your finger is on the trigger. This is a safety feature.

The frame of the pistol has a texture that makes it easier to find under fire, and it also has an extended magazine release that makes it simpler to remove the magazine from the weapon.

The Gen.4 EU series has a magazine well that has a slight flare to it, which makes it easier to load the magazine into the weapon.

If you wear gloves or not, the textured surfaces that are featured all around the pistol construction are an additional ergonomic feature. These textured surfaces make the pistol feel as if it is virtually bonded to your hand when you hold it.

Your pistol's range and accuracy will be significantly improved thanks to the adjustable Hop Up Unit that comes included with this model. This causes the BBs to spin and displace the air around them as they travel, which results in a more stable and accurate flight pattern. The hop-up works by touching the fired BBs with a small rubber contact patch, which causes the BBs to spin and displace the air around them.

The hop can be completely adjusted to accommodate a diverse selection of BB weights and types. To gain access to the Hop-up unit, simply pull the slide back, then place your thumb on the black back plate of the slide, and move it forward until it detaches from the body. This will allow you to access the unit.

If you are looking for a reliable pistol that has a satisfying recoil and additional excitement in the form of the crazy full auto setting that is certain to take your opposing players by surprise, all of which emerges together in a slick ergonomic package, then the EU18 is an excellent choice.

Since it already has a two-toned finish in a flashy camouflage pattern, it is not necessary to wait for it to be painted, and there is also no requirement for UKARA, so you can begin engaging in combat as soon as you can cock the top slide of the pistol.

It does not come with any airsoft gas to power it in the package, but you can buy some by clicking here to go to our airsoft gas page; we recommend green gas for use with this pistol.

It comes with a gas mag in the box, and we also sell replacement magazines for this EU18; you can even buy Co2 magazines to fit this bb gun; scroll down for the full range of mags to fit this pistol.

Comes with A red dot Bds Sight (batteries not inc)

Details
Brand Raven
Length(mm) 210
Weight (g) 0
Fire Modes Semi / Full Auto
Barrel Length (mm) 90
Barrel Bore (mm) 6.03
Rails 20 mm Under Barrel
Approx. FPS 300
Main Materials HIPS Material & Aluminium
EAN 5060644101698
 

Included
(x1) RAVEN EU18 Replica
(x1) RAVEN EU Series 23R STD GAS Magazine
(x1) Manual
(x1) Parts Diagram
(x1) Spare GAS Nozzle
(x1) Spare O-Ring Set
(x2) Grip Back Straps
(X1) RAVEN PVC Patch

Compatible Magazines
RGM-01-01 - EU Series 23R STD GAS Magazine
RGM-01-02 - EU Series 23R STD CO2 Magazine
RGM-01-03 - EU Series 48R EXT GAS Magazine
RGM-01-04 - EU Series 48R EXT CO2 Magazine

Sku :

RGP-01-09-BDS